HP Storageworks 8100 - enterprise virtual array User Manual Download Page 53

Page: 53 / 408

•

iSCSI initiators and MPX200 iSCSI ports can be in different IP subnets. This requires setting the
MPX200 iSCSI gateway feature. See “

MPX200 configuration options

” on page 23 and

Appendix

on page 307 for more information.

•

Both single-path and multipath initiators are supported on the same MPX200.

•

Fibre Channel LUNs and iSCSI LUNs are not supported on the same server.

Apple Mac OS X iSCSI initiator rules and guidelines

The Apple Mac OS X iSCSI initiator supports the following:

•

Power PC and Intel Power Mac G5, Xserve, Mac Pro

•

ATTO Technology Mac driver

•

iSNS

•

CHAP

iSCSI initiator operating system considerations follow:

•

Host-mode setting—Apple Mac OS X

•

Multipathing—Not supported

Microsoft Windows iSCSI initiator rules and guidelines

The Microsoft Windows iSCSI initiator supports the following:

•

Microsoft iSCSI initiator versions 2.08 and 2.07

•

Microsoft iSCSI Initiator for Windows 2008, Vista, and Windows 7

•

Multipath on MPX200 single-blade or dual-blade configurations

iSCSI initiator operating system considerations follow:

•

Host-mode setting—Microsoft Windows 2008 or Windows 2003

•

Tcp1323Opts

parameter (registry)—Must have a value of

DWord=2

under the setting

NOTE:

The

Tcp1323Opts

parameter is set automatically by the HP StorageWorks MPX200 for Enterprise

Virtual Array Windows software kit, which is available at

http://h18006.www1.h p.com/products/storageworks/evaiscsiconnect/index.html

CAUTION:

Using the Registry Editor incorrectly can cause serious problems that may require reinstallation of the
operating system. Use Registry Editor at your own risk. Back up the registry before you make any
changes.

Linux iSCSI initiator rules and guidelines

The Linux iSCSI initiator supports the following:

•

Red Hat Linux and SUSE Linux

•

Multipath using HP Device Mapper

MPX200 Multifunction Router

Summary of Contents for Storageworks 8100 - enterprise virtual array

























































































































































































































































































































































































































Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands

HP Storageworks 8100 - enterprise virtual array, User Manual

Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands