HP Storageworks 8100 - enterprise virtual array, User Manual

Page: 268 / 408

WARNING:
The following command might cause a loss of connections to both GE ports.
Route FC Port ID GE Port ID
----- ---------- ----------
1 FC1 GE1
2 FC2 GE2
Please select a FCIP route from the list above ('q' to quit): 1
Configuring FCIP Route:
-----------------------
FCIP Interfaces FC & GE (0=Enable, 1=Disable) [Enabled ]
IP Address (IPv4 or IPv6; 0=IPv6 Link Local) [44.44.1.124 ]
Subnet Mask [255.255.0.0 ]
Gateway IP Address [0.0.0.0 ]
Remote IP Address [44.44.1.158 ]
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ]
TCP Window Size (0=8KB, 1=16KB, 2=32KB) [32768 ]
Window Scaling (0=Enable, 1=Disable) [Enabled ]
Window Scaling Factor (Min=0, Max=9) [2 ]
TCP Port No. (Min=1024, Max=65535) [3225 ]
GE Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ]
Bandwidth, Mbit/sec (Min=1, Max=1000) [45 ] 150
VLAN (0=Enable, 1=Disable) [Disabled ]
FCIP SW Compression (0=Enable, 1=Disable) [Disabled ]
Do you want to save/discard changes? (0=Save, 1=Discard) [Save ]
All attribute values for FCIP Route 1 will now be saved.
MPX200 <2> (admin) #>
Example 3:
MPX200 <2> (admin) #>
fciproute rm
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both GE ports.
Route FC Port ID GE Port ID
----- ---------- ----------
1 FC1 GE1
2 FC2 GE2
Please select a FCIP route from the list above ('q' to quit): 1
FCIP Route 1 has been removed from the system.
MPX200 <2> (admin) #>
Command referencecommand reference 268