HP Storageworks 8100 - enterprise virtual array User Manual Download Page 310

Page: 310 / 408

ftp>

get HP_StorageWorks_MPX200_FRU.bin

200 PORT command successful.

150 Opening BINARY mode data connection for 'HP_StorageWorks_MPX200_FRU.bin'

(6168 bytes).

226 Transfer complete.

ftp: 6168 bytes received in 0.00Seconds 6168000.00Kbytes/sec.

ftp>

quit

221 Goodbye.

Restoring router configuration and persistent data

Transfer the saved data from a workstation to the router by executing an FTP utility on the
workstation.

The following example shows an FTP transfer to put previously saved router configuration data
on the router:

c:\>

ftp 172.17.137.102

Connected to 172.17.137.102.

220 (none) FTP server (GNU inetutils 1.4.2) ready.

User (172.17.137.102:(none)):

ftp

331 Guest login ok, type your name as password.

Password:

ftp

230 Guest login ok, access restrictions apply.

ftp>

bin

NOTE:

Dual-blade MPX200s perform an automatic field-replaceable unit (FRU) restore on a new blade
any time it is detected in the chassis.

200 Type set to I.

ftp>

put HP StorageWorks MPX200_FRU.bin

200 PORT command successful.

150 Opening BINARY mode data connection for 'HP StorageWorks MPX200_FRU.bin'.

226 Transfer complete.

ftp: 6168 bytes sent in 0.00Seconds 6168000.00Kbytes/sec.

ftp>

quit

221 Goodbye.

Update a blade with the saved configuration data by executing the

fru restore

CLI command.

The

fru restore

command has the following two options:

•

Full restore

restores all router configuration parameters, including IP addresses, subnet masks,

gateways, VPG settings, LUN mappings, and all other persistent data.

•

Partial restore

restores only the LUN mappings and persistent data, such as discovered FC

targets and iSCSI initiators.

Command Line Interface usageCLI usage

310

Summary of Contents for Storageworks 8100 - enterprise virtual array

























































































































































































































































































































































































































Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands

HP Storageworks 8100 - enterprise virtual array, User Manual

Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands