HP Storageworks 8100 - enterprise virtual array, User Manual

Page: 388 / 408

11. In the Array System Viewer dialog box, under the DM-Host group, click the WWN node. Then
at the bottom of the right pane, click Modify WWN Information (see Figure 135 ).
Figure 135 Array System Viewer
.
12. Complete the Modify WWN Information dialog box as follows:
a. Under Assignable WWN , click the WWN of the data migration appliance.
b. Click Add .
c. To accept and save the WWN information, click OK .
13. Under the DM-Host group, click the Logical Unit node. Then at the bottom of the right pane, click
Modify Mapping .
Data migration best practices 388