HP Storageworks 8100 - enterprise virtual array User Manual Download Page 262

Page: 262 / 408

Element

Convention

An alert that calls attention to additional or supplementary
information.

NOTE:

An alert that calls attention to helpful hints and shortcuts.

TIP:

Rack stability

To reduce the risk of personal injury or damage to equipment:

•

Extend leveling jacks to the floor.

•

Ensure that the full weight of the rack rests on the leveling jacks.

•

Instal stabilizing feet on the rack.

•

In multiple-rack installations, fasten racks together securely.

•

Extend only one rack component at a time. Racks can become unstable if more than one component
is extended.

Product warranties

For information about HP StorageWorks product warranties, see the warranty information website:

http://www.hp.com/go/storagewarranty

Support and other resources

262

Summary of Contents for Storageworks 8100 - enterprise virtual array

























































































































































































































































































































































































































Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands

HP Storageworks 8100 - enterprise virtual array, User Manual

Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands