HP Storageworks 8100 - enterprise virtual array, User Manual

Page: 267 / 408

Fciproute
Configures a new FCIP route or modifies or deletes an existing FCIP route. Each FCIP route requires
a dedicated FC and Gigabit Ethernet (GbE) port. Configuring an FCIP route and specifying an FC
and GE port pair take precedence over any previous configuration for the port pair (FC/GE).
Admin session Authority
fciproute [add | mod | rm]
Syntax
Configure a new FCIP route
add
Keywords Modify an existing FCIP route
mod
Remove an existing FCIP route
rm
Example 1:
MPX200 <2> (admin) #>
fciproute add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both GE ports.
Configuring FCIP Route:
-----------------------
FCIP Interfaces FC & GE (0=Enable, 1=Disable) [Enabled ]
FC Port (1=FC1 ) [ ] 1
GE Port (1=GE1 ) [ ] 1
IP Address (IPv4 or IPv6; 0=IPv6 Link Local) [0.0.0.0 ] 44.44.1.124
Subnet Mask [0.0.0.0 ] 255.255.0.0
Gateway IP Address [0.0.0.0 ]
Remote IP Address [0.0.0.0 ] 44.44.1.158
MTU Size (0=Normal, 1=Jumbo, 2=Other) [Normal ]
TCP Window Size (0=8KB, 1=16KB, 2=32KB) [32768 ]
Window Scaling (0=Enable, 1=Disable) [Enabled ]
Window Scaling Factor (Min=0, Max=9) [7 ] 2
TCP Port No. (Min=1024, Max=65535) [3225 ]
GE Port Speed (0=Auto, 1=100Mb, 2=1Gb) [Auto ]
Bandwidth, Mbit/sec (Min=1, Max=1000) [1000 ] 45
VLAN (0=Enable, 1=Disable) [Disabled ]
FCIP SW Compression (0=Enable, 1=Disable) [Disabled ]
All attribute values for FCIP Route 1 will now be saved.
MPX200 <2> (admin) #>
Example 2:
MPX200 <2> (admin) #>
fciproute mod
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
MPX200 Multifunction Router 267