HP Storageworks 8100 - enterprise virtual array, User Manual

Page: 32 / 408

To rack mount the MPX200:
1. Attach the two chassis rails to the MPX200 chassis using three 10-32 x 1/4 in. screws for each
rail. Make sure that the end with the flange is facing the rear of the chassis (
Figure 9 ).
The MPX200 has multiple mounting holes to allow for adjustable setback. Secure the chassis rails
in the desired position if additional room is needed.
2. Screws, flathead, 10-32 x 1/4 in. 1. Chassis rail
Figure 9 Chassis rails
.
2. Assemble the front and rear rack rails; secure them loosely using four 6-32 x 1/4 in. screws
(
Figure 10 ).
2. Front rack rail 1. Rear rack rail
3. Screw, flathead, 6-32 x 1/4
in.
Figure 10 Rack rails
.
Installing the MPX200 32