HP Storageworks 8100 - enterprise virtual array User Manual Download Page 286

Page: 286 / 408

alphabetical (a-z, A-Z), numerical (0-9), colon, hyphen, and period.

Changes to the Settings below will be effective after a reboot.

System Symbolic Name (Max = 64 characters) [Blade-1 ]

Embed Symbolic Name (0=Enable, 1=Disable) [Disabled ]

Mode (0=iSCSI Server Connectivity),

1=SAN over WAN,

2=iSCSI Server Connectivity/SAN over WAN,

3=Data Migration) [iSCSI Connectivity]

Target Presentation Mode (0=Auto, 1=Manual) [Auto ]

Lun Mapping (0=Enable, 1=Disable) [Disabled ]

Controller Lun AutoMap (0=Enable, 1=Disable) [Enabled ]

Target Access Control (0=Enable, 1=Disable) [Disabled ]

All attribute values that have been changed will now be saved.

Set VPGroups

Sets VPGs on the blade. Allows you to enable or disable VPGs, and modify the VPG name.

Admin session

Authority

set vpgroups [vpgroup index]

Syntax

Example:

The following example shows how to enable VPGs 2 and 3:

MPX200 <1>(admin) #>

set vpgroups

The following wizard will query for attributes before persisting

and activating the updated mapping in the system configuration.

If you wish to terminate this wizard before reaching the end of the list

press 'q' or 'Q' and the ENTER key to do so.

Configuring VpGroup: 1

-------------------------

Status (0=Enable, 1=Disable) [Enabled ]

VpGroup Name (Max = 64 characters) [VPGROUP_1 ]

All attribute values for VpGroup 1 that have been changed will now be saved.

Configuring VpGroup: 2

-------------------------

Status (0=Enable, 1=Disable) [Disabled ]

VpGroup Name (Max = 64 characters) [VPGROUP_2 ]

All attribute values for VpGroup 2 that have been changed will now be saved.

Configuring VpGroup: 3

-------------------------

Status (0=Enable, 1=Disable) [Disabled ]

VpGroup Name (Max = 64 characters) [VPGROUP_3 ]

All attribute values for VpGroup 3 that have been changed will now be saved.

Configuring VpGroup: 4

-------------------------

Status (0=Enable, 1=Disable) [Disabled ]

All attribute values for VpGroup 4 that have been changed will now be saved.

Show

Displays operational information for the blade.

None

Authority

Command referencecommand reference

286

Summary of Contents for Storageworks 8100 - enterprise virtual array

























































































































































































































































































































































































































Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands

HP Storageworks 8100 - enterprise virtual array, User Manual

Search results

Summary of Contents for Storageworks 8100 - enterprise virtual array

Reviews:

Related manuals for Storageworks 8100 - enterprise virtual array

Brands by name

Popular brands