HP Storageworks 8100 - enterprise virtual array, User Manual

Page: 96 / 408

Adding targets to the QLogic iSCSI initiator
To add HBA port targets:
1. Click the green plus sign ( Figure 60 ).
2. Enter the first iSCSI target port IP address.
Figure 60 HBA Port Target Configuration window
.
3. Repeat steps 1 and 2 for each MPX200 you want to add.
4. Click Next .
5. To activate the changes, enter the SMS password: config .
6. Select the Target Settings tab. Verify that the HBA state is Ready, Link Up and that each target
entry’s state is Session Active ( Figure 61 ).
Figure 61 Target Settings tab
.
MPX200 iSCSI configuration rules and guidelines 96