Hioki Memory HiCorder MR6000, Instruction Manual, Page: 14 / 392

8
Setting Measurement Conditions
Update rate of each module
The data refresh rate is not allowed to exceed the maximum sampling rate of each module.
The instrument measures the same data until the data gets updated, causing the instrument to plot
a stair-step waveform.
In addition, even though the instrument measures the same signal simultaneously, values may vary
due to differences in the sampling rate, frequency range, and frequency characteristics of modules.
Modules
Maximum sampling rate
or data update rate
Reference
Model 8966 Analog Unit 20 MS/s (50 ns) –
Model 8967 Temp Unit Depends on the data refresh setting. p. 66
Model 8968 High Resolution Unit 1 MS/s (1 µs) –
Model U8969 Strain Unit 200 kS/s (5 µs) –
Model 8970 Freq Unit Depends on the setting. p. 70
Model 8971 Current Unit 1 MS/s (1 µs) –
Model 8972 DC/RMS Unit Depends on the response setting. p. 75
Model 8973 Logic Unit 20 MS/s (50 ns) –
MR8990
Digital Voltmeter Unit
Depends on the NPLC setting. p. 76
Model U8974 High Voltage Unit Depends on the response setting. p. 78
Model U8975 4ch Analog Unit 5 MS/s (200 ns) –
Model U8976 High Speed Analog Unit 200 MS/s (5 ns) –
Model U8977 3CH Current Unit 5 MS/s (200 ns) –
Model U8978 4CH Analog Unit 5 MS/s (200 ns) –
U8979 Charge Unit 200 kS/s (5 µs) –
HIOKI MR6000A966-03