Hioki Memory HiCorder MR6000, Instruction Manual, Page: 134 / 392

128
Setting the Trigger Satisfaction Conditions (AND/OR Operation) Among Trigger Sources
Setting example: To trigger the instrument when a waveform crosses the zero-volt level
while rising ( [ ] *)
The instrument is triggered based on whether the trigger satisfaction condition is set to AND or OR
operation in the following ways:
Channel Trigger Level Slope Filter
CH1, CH2 Level 0.00 V * Off
[AND] [OR]
One waveform is above 0 V, and
the other is also above 0 V.
Either waveform crosses 0 V
upwards.
Start Start
When the trigger timing is set to
[Start/Stop]
, the instrument determines that a logical AND or OR
operation is satisfied in a set of trigger sources assigned to the start trigger or those assigned to the
stop trigger.
*: With the [AND] setting, the slope setting item appears as [HIGH] .
HIOKI MR6000A966-03