Hioki Memory HiCorder MR6000, Instruction Manual, Page: 167 / 392

161
7 Numerical Calculation Function
7
Numerical Calculation Function
The instrument performs calculations using acquired waveform data to numerically displays
calculation results on the waveform screen. The instrument can evaluate these calculation results
on a pass/fail basis.
No numerical calculation is available when the envelope is used.
> [Calculation] > [Numerical calculation]
Operation available on the [Numerical calculation] screen
Numerical calculation
• Average
• RMS
• P-P
• Maximum
• Time to maximum
• Minimum
• Time to minimum
• Period
• Frequency
• Rise time
• Fall time
• Standard deviation
• Area
• X-Y area
• Time to level
• Level at time
• Pulse width
• Duty ratio
• Pulse count
• Arithmetic operations
• Time difference
• Phase contrast
• High level
• Low level
• Intermediate value
• Amplitude
• Overshoot
• Undershoot
• +Width
• −Width
• Burst width
• Accumulation
• Angle of XY waveform
• CAN statistics
(33 types in total)
•Calculation using data between
section cursors
Numerical calculations can be
performed for data within the
range specified with section
cursors.
For details on arithmetic
expressions, refer to “Calculation
target channels and setting contents
of calculation conditions for each
calculation type” (p. 167).
Evaluating numerical calculation results
on a pass/fail basis(p. 177)
Evaluating numerical calculation results by
comparing them with specified reference ranges,
giving pass or fail judgments.
The instrument can simultaneously execute up
to 32 types of numerical calculations. When the
scaling function is enabled, the instrument performs
calculations using scaled values.
Numerical Calculation Function
HIOKI MR6000A966-03