Hioki Memory HiCorder MR6000, Instruction Manual, Page: 178 / 392

172
Configuring the Numerical Calculation Settings
Setting Description Sample screen
Burst width Target channel
(Analog, logic, real-time
waveform calculation)
Allows you to specify
calculation target channels.
Slope
(Logic channels
only)

Detects rising edges and
calculates a burst width.
Detects falling edges and
calculates a burst width.
Filter(samples)
( Off  , 10 to 10,000 )
Allows you to enter duration
used to determine that a
waveform crosses the specified
level.
Only after a waveform has
crossed the level and does not
cross the level again within
the specified filter duration,
the waveform is considered to
have crossed the level.
This is useful to eliminate false
level-crossing events caused
by noise.
Burst end filter(samples)
(
Off
 , 10 to 10,000 )
Allows you to set duration
used to determine whether a
waveform is a burst signal.
If a period from the time when
a waveform falls within the
window level range to the
time when it exits the range
becomes longer than the
specified filter duration, the
instrument determines the
detected period to be a burst
duration.
Window-level range*
( Up , Low )
Allows you to enter an upper
and lower limit values used to
determine whether a waveform
is a burst signal.
Stat. Top
 Detects the value obtained first
from the beginning within the
specified range.
Average Calculates the average,
maximum, or minimum value
for each parameter within the
specified range.
Max
Min
Times Calculates the value when the
number of times a waveform
crosses the level reaches the
specified number from the
beginning within the specified
range.
*: You can set a level within the range of −9.9999E+29 to −1.0000E29, at zero, within the range of +1.0000E29 to
+9.9999E+29. A value to five significant figures can be specified (a value to 10 significant figures can be specified
for a time of the level at time setting).
HIOKI MR6000A966-03