Hioki Memory HiCorder MR6000, Instruction Manual, Page: 102 / 392

96
Configuring Module-Specific Settings
No. Element Function
4
Select number Displays the number you chose. The step will be used as the
reference step to execute steps
5
through
8
.
5
Edit Allows you to edit the chosen step.
Use the [Setting program step] dialog to enter parameters you wish
to edit. Tap [OK] to confirm your entries by overwriting the existing
step.
•When you set the [Sweep] column to [On] , the dialog will display
the string [Sweeping times] ; when [Off] , the string instead.
•The [Sweep times] setting cannot be configured if the [Sweep]
column is set to [Off] .
6
Addition
Adds a step after the last step.
7
Insert
Inserts a step before the chosen step.
8
Delete
Deletes the chosen step.
9 Delete all
Deletes all steps.
10 OK
Registers the program list.
11
Cancel
Does not update the program list. Your entry will be discarded.
For information on other user-interface elements and their functions, see “Configuring Model
U8793 Arbitrary Waveform Generator Unit” (p. 86).
HIOKI MR6000A966-03