Hioki Memory HiCorder MR6000, Instruction Manual, Page: 315 / 392

309
13
Configuring the System
Environment Settings
You can configure the system environment settings for the instrument.
IMPORTANT
Do not change any Windows
®
setting unless otherwise indicated in this document.
Doing so may cause unstable system operation.
> [System] > [Env.]
9
13
1
2
3
5
6
7
10
14
15
11
12
16
17
4 8
1
Tap the [Drawing Start_Position] box, and then choose a start position of the scrolling
display from the list.
Left edge

Starts scrolling through waveforms from the left side of the waveform screen.
Right edge Starts scrolling through waveforms from the right side of the waveform screen.
2
Tap the [Display comments] button to choose a comment display setting.
You can display a title comment and each channel comment on the waveform screen. Each channel comment
appears along with each input-channel marker.
On  Displays comments.
Off
Does not display any comments.
3
Tap the [Zero position] button to choose a zero-position marker display setting.
You can display markers at the zero position of each input channel on the time-axis waveform display.
Off
 Does not display any markers.
On Displays markers at the zero positions on the left side of the waveform screen.
13 Configuring the System Environment Settings
Configuring the System Environment Settings
HIOKI MR6000A966-03