Hioki Memory HiCorder MR6000, Instruction Manual, Page: 121 / 392

115
Loading Data
Loading waveform data in a batch
Loading one of the following index files allows waveform data to be loaded in a batch. Configuring
the following settings allows the instrument to create an index files and waveform file together.
Extension Content
IDX Loads divided files in a batch.
The instrument with the file division setting creates an index file (the file division setting is
included in the automatic saving or the SAVE key operation settings). However, when [Type]
is set to any type other than
[Waveform (Binary)]
, the instrument does not create any index
file.
See “Automatically saving waveform data” (p. 102) and “Freely choosing data items to be
saved and save files (SAVE key)” (p. 109).
SEQ (When using the memory division function)
The instrument loads waveforms of all blocks at a time.
The instrument creates an index file when the instrument with the memory division function
enabled automatically save data or you press the SAVE key to save data of all blocks (p. 112).
See “Freely choosing data items to be saved and save files (SAVE key)” (p. 109) and
“Automatic saving for the memory division setting” (p. 259).
Automatically loading the settings (Automatic setup function)
The instrument can load a setting file with the file name “STARTUP” in the [CONFIG] folder in the
[HIOKI_MR6000] folder at the time of startup.
The instrument searches the drives beginning from drive D in alphabetical order for the file
“STARTUP.SET,” loading the file found first.
Saving/Loading Data and Managing Files
HIOKI MR6000A966-03