Hioki Memory HiCorder MR6000, Instruction Manual, Page: 58 / 392

52
Overlaying New Waveforms With Previously Acquired Waveforms
3.1 Overlaying New Waveforms With Previously
Acquired Waveforms
New waveforms can be overlaid with the presently displayed waveforms.
• You can compare the new waveforms with those recorded before. (When [Mode] is set to
[Repeat] ) (p. 6)
• Two methods are available to overlay waveforms: the automatic overlaying during measurement
and the manual overlaying.
> [Status] > [Condition]
1
1
Tap the [Overlay] box, and then choose an overlaying method from the list.
Off  Does not overlay the waveforms.
Auto Overlays waveforms newly acquired with the presently displayed waveforms every
time the instrument acquires new ones.
When [Mode] is set to [Repeat] , the instrument overlays the new waveforms with
the presently displayed waveforms beginning from the start until the stop of the
measurement.
Manual Manually overlays the new waveforms with the presently displayed waveforms.
See step 3 “Overlay the waveforms manually (leaving any waveforms to be displayed
on the screen).” (p. 53).
See “When the overlay function is enabled (When [Overlay] is set to [Auto] or [Manual] )” (p. 53).
HIOKI MR6000A966-03