Hioki Memory HiCorder MR6000, Instruction Manual, Page: 70 / 392

64
Copying Settings (Copy Function)
3.6 Copying Settings (Copy Function)
You can copy settings of other channels, as well as the trigger settings and the real-time waveform
calculation settings (Model MR6000-01 only).
The following procedure explains how to copy settings of another channel.
> [Func] > [Copy] > [Channel]
The [Copy settings] dialog box appears.
2
1
3
4
1
In the [Contents] area, tap one or more of items that you want to copy.
Depending on module types, some items may not be able to be copied.
Basic Copies the mode, measurement range, coupling, L.P.F., division ratio, and module-
specific settings.
Display Copies the display setting (excluding comments).
Comment Copies a comment.
Scaling Copies the scaling setting.
2
Tap the [Source] box, and then choose a source channel from the list.
3
Tap the [Destination] box, and then choose a destination channel from the list.
Otherwise, tap [All] .
CH1-1

(Channel selection)
Tap this option when you would like to copy the settings to any one of the channels,
and then choose a destination channel from the list.
All Copies settings to UNIT 1 through UNIT 8.
4
Tap [Copy] .
After copying the settings, check that the measurement range, as well as setting values, such as the level,
upper, and lower values, of the trigger function, the search function, and the numerical calculation function are
appropriate.
HIOKI MR6000A966-03