Hioki Memory HiCorder MR6000, Instruction Manual, Page: 181 / 392

175
Configuring the Numerical Calculation Settings
Displaying numerical calculation results
This section describes how to check calculation results on the waveform screen.
> [Numerical calculation]
2
1
4
3
5
1
Tap [Numerical calculation] .
Every time you tap it, the numerical calculation result screen appears or hides.
If the instrument cannot calculate the periods or discontinue the calculations, results are expressed as the
string [ ∗∗∗∗∗∗ ] .
The results of channels not set as calculation targets are expressed as the sign [–] .
2
Tap [Previous page] or [Next page] .
If the instrument cannot display some of the results of all channels’ numerical calculations on a single screen,
you can switch over the page.
3
Tap [No.1 – No.16] or [No.17 – No.32] .
A single screen can display 16 types of numerical calculation results. Every time you tap either, the the
numerical calculation results switches between those for Nos. 1 through 16 and those for Nos. 17 through 32.
4
Tap [Align the columns of channels] or [Display left-justified] .
Every time you tap either, alignment of numerical calculation results is switched.
If you choose [Align the columns of channels] , the results including those of channels not set as calculation
targets are displayed as well.
If you choose [Display left-justified] , results of channels only set as calculation targets are displayed in left
alignment.
Numerical Calculation Function
HIOKI MR6000A966-03