Hioki Memory HiCorder MR6000, Instruction Manual, Page: 226 / 392

220
Examples of Configuring Waveform Calculation Settings
Table A Relationship among sampling rates, sampling frequencies, cutoff
frequencies, and setting resolutions of cutoff frequencies (for both
FIR and IIR filters)
Sampling rate
Sampling
period
Sampling
frequency
Upper limit of cutoff
frequency
(Value less than this
frequency can be set)
Cutoff frequency
setting resolution
200 MS/s 5 ns 200 MHz 100 MHz 200 kHz
100 MS/s 10 ns 100 MHz 50 MHz 100 kHz
50 MS/s 20 ns 50 MHz 25 MHz 50 kHz
20 MS/s 50 ns 20 MHz 10 MHz 20 kHz
10 MS/s 100 ns 10 MHz 5 MHz 10 kHz
5 MS/s 200 ns 5 MHz 2.5 MHz 5 kHz
2 MS/s 500 ns 2 MHz 1 MHz 2 kHz
1 MS/s 1 µs 1 MHz 500 kHz 1 kHz
500 kS/s 2 µs 500 kHz 250 kHz 500 Hz
200 kS/s 5 µs 200 kHz 100 kHz 200 Hz
100 kS/s 10 µs 100 kHz 50 kHz 100 Hz
50 kS/s 20 µs 50 kHz 25 kHz 50 Hz
20 kS/s 50 µs 20 kHz 10 kHz 20 Hz
10 kS/s 100 µs 10 kHz 5 kHz 10 Hz
5 kS/s 200 µs 5 kHz 2.5 kHz 5 Hz
2 kS/s 500 µs 2 kHz 1 kHz 2 Hz
1 kS/s 1 ms 1 kHz 500 Hz 1 Hz
500 S/s 2 ms 500 Hz 250 Hz 500 mHz
200 S/s 5 ms 200 Hz 100 Hz 200 mHz
100 S/s 10 ms 100 Hz 50 Hz 100 mHz
50 S/s 20 ms 50 Hz 25 Hz 50 mHz
20 S/s 50 ms 20 Hz 10 Hz 20 mHz
10 S/s 100 ms 10 Hz 5 Hz 10 mHz
5 S/s 200 ms 5 Hz 2.5 Hz 5 mHz
2 S/s 500 ms 2 Hz 1 Hz 2 mHz
1 S/s 1 s 1 Hz 0.5 Hz 1 mHz
• Stating a measurement and waveform calculation with the instrument having no waveform data
allows the sampling rate setting on the measurement setting screen or the waveform screen to
define a settable upper limit of a cutoff frequency.
• Tapping [Execute] on the waveform calculation screen to perform calculations using waveform
data previously acquired in the instrument allows the sampling rate setting to define a settable
upper limit of a cutoff frequency.
• The instrument with the external sampling clock setting performs calculations with one sample
fixed at 1 Hz.
HIOKI MR6000A966-03