manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Instruction Manual, Page: 326 / 392

Share
Download
Hioki Memory HiCorder MR6000 Instruction Manual Download Page 326

320

Configuring the LAN Settings and Connecting the Instrument to the Network

Renaming the computer

This name in the 

[Current PC name]

 box identifies the instrument on the network.

If necessary, change the computer name to a unique one among the network devices.

 > [System] > [Comm.]

1

1 

Tap 

[Open PC settings.]

.

The Ethernet settings screen appears.

2 

Tap 

[Home]

.

The Windows

®

 settings screen appears.

3 

Tap 

[System]

.

4 

Tap 

[About]

 under System.

5 

Tap 

[Rename PC]

, and then enter another name in the 

[Current PC name]

 box.

6 

Tap 

[Next]

.

Restarting the instrument is required.

7 

Tap 

[Restart now]

.

HIOKI MR6000A966-03

Summary of Contents for Memory HiCorder MR6000









































































































































































































































































































































































































Reviews:

No comments