Hioki Memory HiCorder MR6000, Instruction Manual, Page: 10 / 392

4
Measurement Procedure
To configuring measurement settings automatically
Tapping
[Auto range]
on the waveform screen automatically specifies the sampling rate,
measurement range, and zero position of the input waveform and start a measurement.
See “3.7 Measuring Signals With the Auto-range Setting” in the Quick Start Manual.
To load settings registered previously
Load the settings file on the file screen.
See “4.3 Loading Data” (p. 113).
To automatically load saved settings at the time of startup
Configure the setting for the instrument so as to load the file containing the instrument settings at
the time of startup.
See “Automatically loading the settings (Automatic setup function)” (p. 115).
Initializing the instrument (Restoring the basic settings)
Select > [System] > [Initialize] to restore the instrument settings to the factory default.
The setting after the initialization is suitable for simple measurement.
Initialize the instrument when you have found any unexpected or complicated operation.
See “6.2 Initializing the Instrument” in the Quick Start Manual.
HIOKI MR6000A966-03