Hioki Memory HiCorder MR6000, Instruction Manual, Page: 154 / 392

148
Searching For Peak Values
6.1 Searching For Peak Values
You can choose any one of the maximum, minimum, maximal, and minimal values and search
measured data for it.
>
1
4
5
6
7
9
8
3
2
1
Tap the [Target channel] box, and then from the channel setting dialog box, choose a
channels to be searched for values.
2
Tap the [Range] box, and then choose an option for the search range from the list.
Whole

Searches whole waveform for values.
Segment 1
,
Segment 2
Search a range specified as Segment 1 or Segment 2 for values.
See “2.2 Specifying the Waveform Range (Section Cursor)” (p. 34).
3
Tap the [Number of searches] box, and then enter the number of search results.
4
Tap the [Event mark] box to set whether to display event marks at positions where user-
defined search conditions have been satisfied.
On

Displays event marks.
Off Does not display event marks.
5
In the [Method] area, tap [Peak] to choose a search method for searching for peak values.
HIOKI MR6000A966-03