manualshive.com logo in svg

Hioki Memory HiCorder MR6000, Instruction Manual, Page: 231 / 392

Share
Download
Hioki Memory HiCorder MR6000 Instruction Manual Download Page 231

225

Operating Procedure

Performing calculations using existing data

(Loading data)

(To load waveform data to use for calculation from a 

storage device)

(p. 113)

Configuring the calculation 

settings

Configure the calculation settings on the 

[FFT calculation]

 

screen.

Configuring the waveform screen display setting.

(p. 228)

(p. 19)

Performing calculation

Choose 

[Execute]

 to perform calculation.

(To force-quit calculation, press the 

STOP

 key.)

Displaying FFT calculation 

results

The instrument displays results on the waveform screen.

(Saving results)

Save calculation results as needed.

 •To save results, press the 

SAVE

 key.

Finishing the analyses.

To specify a calculation range and perform calculation

You can specify a calculation range on the waveform screen.

See “9.4 Performing Calculations on the Waveform Screen” (p. 242).

To automatically save waveform calculation results after measurement

See “Automatically saving waveform data” (p. 102).

FFT
 Calculation Function

HIOKI MR6000A966-03

Summary of Contents for Memory HiCorder MR6000









































































































































































































































































































































































































Reviews:

No comments