Hioki Memory HiCorder MR6000, Instruction Manual, Page: 90 / 392

84
Configuring Module-Specific Settings
Generating signals from Model U8793 Arbitrary Waveform Generator
Unit
For details, see the U8793’s Instruction Manual.
This section describes how to select the Arbitrary Waveform Generator Unit’s output
synchronization control and setting method.
> [Channel] > [U8793]
1
2
4
5
3
1
Tap the [All Synchronization] button to set it to [On] or [Off] .
On Controls the signal generation of all modules’ all channels simultaneously.
Off  Controls the signal generation of the channels only set on this screen.
2
Tap the [Use&Synchronization] button to set it to [On] or [Off] .
On Synchronizes signal outputting with the start/stop of measurements.
The signals outputs and stops respectively in sync with the the start and stop of
measurements.
Off
 Synchronizes signal outputting with the start/stop of measurements.
Does not synchronize signal output with the start/stop of measurements.
3
Tap the [Output] button to set it to [On] or [Off] .
On Outputs the signals.
Off

Stops outputting the signals.
HIOKI MR6000A966-03