Hioki Memory HiCorder MR6000, Instruction Manual, Page: 19 / 392

13
Configuring the Input Channel Settings
Analog channels
For details on configuring each module setting, refer to “3.7 Configuring Module-Specific Settings”
(p. 65).
> [Channel] > each module (UNIT)
4
8
1
2
3
5
6
The instrument displays the waveform screen during
measurement.
When the instrument does not perform measurement, it
displays the presently inputted waveforms on the monitor.
9
9
9
10
7
8
1
Tap the [Use] button to set it to [On] or [Off] .
On  Measures waveforms through this module.
Off Does not measure any waveform through this module.
Since no data is acquired, the instrument displays or saves nothing.
2
Enter a comment in the [Comment] box.
Number of characters that can be entered: up to 40
3
Tap the [Mode] box, and then choose a measurement mode from the list.
Voltage  Measures a waveform in voltage mode.
Temperature
Measures a waveform in temperature mode.
Selectable modes vary depending on the installed modules.
See “3.7 Configuring Module-Specific Settings” (p. 65).
Measurement Method
HIOKI MR6000A966-03