Hioki Memory HiCorder MR6000, Instruction Manual, Page: 291 / 392

285
Configuring the CAN/LIN Interface Settings
12.3 Configuring the CAN/LIN Interface Settings
This section describes how to configure condition settings required for measurement, such as the baud
rate and packet filter.
> [Channel] > [UNIT] > [CAN/LIN]
2
4
3
5
1
1
Tap the [UNIT/CAN] selector box, and then choose [CAN/LIN] .
2
Tap the [Measurement] button to set it to [On] or [Off] .
Off  Does not designate the channel as a measuring target.
The instrument does not acquire any data; nothing is displayed or saved.
On
Designates the channel as a measuring target.
3
Enter a comment in the [Comment] box.
Number of characters that can be entered: up to 40
4
Tap the [Mode] box, and then from the list, choose a CAN mode (setting common to C1
through C4).
CAN  Enters CAN mode.
CAN FD Enters CAN FD mode.
LIN Enters LIN mode.
5
Tap the [Baudrate] box, and then from the list, choose a baud rate.
CAN , CAN FD 33.3 k , 50 k , 83.3 k , 100 k , 125 k , 250 k , 500 k  , 1 M (Baud)
LIN 2.4 k
 ,
9.6 k
,
14.4 k
,
19.2 k (Baud)
CAN/LIN Measurement Function
HIOKI MR6000A966-03