Hioki Memory HiCorder MR6000, Instruction Manual, Page: 85 / 392

79
Configuring Module-Specific Settings
Configuring Model U8977 3CH Current Unit Settings
Each of Model 9709, Model CT6860 series, and Model CT6840 consists of a current sensor with
the sub model-number “-05,” which has a metal connector, and that without the sub model-number
“-05,” which has a black plastic connector.
You can directly connect a current sensor that has the sub model-number “-05,” which has a metal
connector, with Model U8977 3CH Current Unit. Using Model CT9900 Conversion Cable, you can
connect a current sensor without the sub model-number “-05,” which has a black plastic connector,
to Model U8977 3CH Current Unit.
> [Channel] > [U8977]
2
1
3
Current sensors to be connected determine whether the instrument automatically recognizes mode
or whether you have to choose a current sensor setting.
1
(When the instrument automatically recognizes the sensors connected) Confirm the output
rate displayed in the [Mode] area.
Available measurement ranges, which depend on automatically recognized output rates, are as follows:
20A/2V 2 A, 4 A, 10 A, 20 A, 40 A, 100 A
50A/2V 4 A, 10 A, 20 A, 40 A, 100 A, 200 A
200A/2V
20 A, 40 A, 100 A, 200 A, 400 A, 1000 A
500A/2V * 40 A, 100 A, 200 A, 400 A, 1000 A, 2000 A
1000A/2V 100 A, 200 A, 400 A, 1000 A, 2000 A, 4000 A
2000A/2V 200 A, 400 A, 1000 A, 2000 A, 4000 A, 10000 A
None When no current sensor is connected.
*: When Model CT6846 or Model CT6865 connects via Model CT9900 Conversion Cable, the instrument
recognizes the sensor as a 500 A AC/DC sensor. Set the conversion ratio at 2.00 in the scaling setting.
Advanced Functions
HIOKI MR6000A966-03