Hioki Memory HiCorder MR6000, Instruction Manual, Page: 278 / 392

272
Calculation Function
11.4 Calculation Function
After measurement has finished, you can preform various calculation using instantaneous
waveforms.
1
Configure various calculation settings.
The following calculations are available:
• Numerical calculation See “7 Numerical Calculation Function” (p. 161).
• Waveform calculation See “8 Waveform Calculation Function” (p. 189).
• FFT calculation See “9 FFT Calculation Function” (p. 223).
2
Tap the button.
The waveform screen is displayed.
5
FFT
calculation
Numerical
calculation
3
4
5
3
When the displayed waveforms are set to [Dual] or [Instantaneous]
Tap [<] and [>] to choose a block number of instantaneous waveforms to be used for
calculation.
When the displayed waveforms are set to
[Dual]
, you can also choose a block number by tapping the position
number of the instantaneous waveform position marks.
4
Tap [Execute Calc.] .
The calculation is executed.
When all calculations are set to
[Off]
,
[Execute Calc.]
does not appear.
HIOKI MR6000A966-03