Hioki Memory HiCorder MR6000, Instruction Manual, Page: 351 / 392

345
Controlling the Instrument With Command Communications (LAN)
14.6 Controlling the Instrument With Command
Communications (LAN)
You can externally control the instrument using commands via the communication interface.
Communications can be established with a LAN connection.
For details, refer to the Communication Command Instruction Manual on the accompanying
application disc.
Configure the LAN settings and connect the instrument before using the command communications.
See “14.1 Configuring the LAN Settings and Connecting the Instrument to the Network” (p. 317).
> [System] > [Comm.]
1
Tap [Communication command] .
The setting dialog box appears.
2
3
4
5
6
2
Tap the [Communication command] button to set it to [On] .
3
Tap the [Delimiter] box, and then choose a character code (line feed code) that represents
the data delimiter.
CR+LF  Sends the character codes 0x0d and 0x0a.
LF
Sends the character code 0x0a.
4
Tap the [ Header] to choose whether to prefix a header to command responses.
Off  Does not prefix any header to response data.
On
Prefixes a header to response data.
Connecting the Instrument to Computers
HIOKI MR6000A966-03