Hioki Memory HiCorder MR6000, Instruction Manual, Page: 113 / 392

107
Saving Data
• When [Method] is set to [Delete] , the recording length can be set at 10000 days at a maximum;
however, data the instrument retains after the measurement is limited to a free space size of a
storage device at the start of recording (recording time of the normal saving).
> [Status] > [Save]
2
3
4
7
5
6
1
On the [Condition] screen, configure the realtime save and sampling settings.
See “1.2 Setting Measurement Conditions” (p. 5).
2
Tap the [Media] box, and then choose a destination to save from the list.
When selecting [FTP] as the destination to save, you can specify another backup destination used if the
communication fails.
When a backup is enabled, choose from SSD/HDD, SD card, and USB flash drive for the destination to save.
3
Tap the [Recording time] box, and then enter a recording time.
d 0 to 10000 (days)
h 0 to 23 (hours)
min 0 to 59 (minutes)
s
0 to 59 (seconds)
4
Tap the [Split] button to specify whether to divide a file before it is saved.
Off

Does not divide a file.
On Divides a file.
Saving/Loading Data and Managing Files
HIOKI MR6000A966-03