Hioki Memory HiCorder MR6000, Instruction Manual, Page: 174 / 392

168
Configuring the Numerical Calculation Settings
Setting Description Sample screen
Period
Frequency
Pulse width
Duty ratio
Target channel
(Analog, logic, real-time
waveform calculation)
Allows you to specify channels
as calculation targets.
Level *
The instrument performs
calculations using values
based on a period of time
when a waveform crossed the
level specified here. No setting
is available for logic channels.
Slope
No slope can
be specified for
calculating the
duty ratio.

Performs calculations using
values based on a period of
time when a waveform crossed
the specified level while rising.
Performs calculations using
values based on a period of
time when a waveform crossed
the specified level while falling.
Filter(samples)
( Off  , 10 to 10,000 )
Allows you to enter duration
used to determine that a
waveform crosses the specified
level.
Only after a waveform has
crossed the level and has
never crossed the level
again during the specified
filter duration, the instrument
determines that the waveform
has crossed the level.
This is useful to eliminate false
level-crossing events caused
by noise.
Stat. Top  Detects a value obtained first
from the beginning within the
specified range.
Average Calculates the average,
maximum, or minimum value
for each parameter within the
specified range.
Max
Min
Times Calculates the value when the
number of times a waveform
crosses the level reaches the
specified number from the
beginning within the specified
range.
*: You can set a level within the range of −9.9999E+29 to −1.0000E29, at zero, within the range of +1.0000E29 to
+9.9999E+29. A value to five significant figures can be specified (a value to 10 significant figures can be specified
for a time of the level at time setting).
HIOKI MR6000A966-03