Hioki Memory HiCorder MR6000, Instruction Manual, Page: 105 / 392

99
Data That Can Be Saved and Loaded
*1: The instrument automatically loads data at the time of startup. (p. 115)
*2: To load data with the instrument: Save the data in binary format. Waveform data and a part of
measurement settings data are saved.
To load data on your computer: Save the data in text format. (p. 100)
To save a part of waveforms: Specify the saving range with section cursors. (p. 30, p. 34)
*3: Data can be loaded with Wave Viewer (Wv).
*4: To load all blocks when the memory division is used
Save waveform data using [All block] . The instrument automatically creates a directory, waveform data
of each block, and index data (SEQ). To load waveform data of each block, load this index data.
To load divided waveform data, load the index data (IDX).
*5: BMP format: This is one of the standard Windows
®
image file format. Various graphics programs can
open these files.
PNG format: Internationally standardized image file format conforming to ISO/IEC15948
JPEG format: Internationally standardized image format conforming to ISO/IEC10918
*6: When you choose a separator other than [Comma ,] in [Region] , files are saved with the .TXT extension.
(p. 314)
Saving/Loading Data and Managing Files
HIOKI MR6000A966-03