Hioki Memory HiCorder MR6000, Instruction Manual, Page: 280 / 392

274
Files
11.5 Files
You can save and load dual sampling waveform files.
Arranges the reference waveform so that its start point is aligned with that of the displayed block
waveform.
The instrument saves instantaneous waveforms at the moment when finishing the measurement
of each block, which is specified by the number of blocks you wish to use in the memory division
settings.
When it has saved instantaneous waveforms of all blocks during measurement, it subsequently
starts to save trend waveforms. When instantaneous waveforms of some blocks have been left
unsaved on the completion of the measurement, the instrument starts to save trend waveforms at
that moment.
The automatic saving function requires you to configure the settings, including save destinations
and saving types, in advance of measurement.
See “4 Saving/Loading Data and Managing Files” (p. 97).
When the automatic saving function is enabled, the instrument saves trend waveforms and
instantaneous waveforms of all blocks in a batch. An index file is also saved simultaneously.
Dual sampling waveform files you can save and load

: enabled, –: disabled
File type
File
format
Extension Content
Automatic
saving
Manual
save
Load onto
MR6000
Load onto
computer
Waveform
data
Binary
MEM
Instantaneous
waveform
measured data
   
*
1
REC
Trend
waveform
measured data
   
*
1
Text REC Text data
 
–

Float CSV, TXT Floating point
data
–

– –
Management
data*
2
Index R_M
Binary
batch-save
management
data
  
–
*1 Loadable with Waveform Viewer (Wv)
*2 Automatically created when all binary files are collectively saved.
HIOKI MR6000A966-03