Hioki Memory HiCorder MR6000, Instruction Manual, Page: 160 / 392

154
Searching For Positions Where a Trigger Condition Is Satisfied
-2. When you choose a logic channel under [Target channel]
The instrument searches for positions where signals match the specified pattern.
You cannot use this function when the envelope function is used.
Trigger pattern
LA1
1
LA2 0
LA3 X
LA4 X
Setting Description
Condition
satisfied
OR  Positions where any one of the signals matches the specified search
patterns are determined to be retrieved positions.
AND
Positions where all signals match the specified patterns are
determined to be retrieved positions.
Filter Off  ,
10 to 10,000
Allows you to enter a filter width in the number of samples. Positions
where a search condition is continuously satisfied during the
specified period are determined to be the retrieved positions.
Trigger pattern X
 Ignores data.
0 Searches for low-level positions.
1 Searches for high-level positions.
For the logic search, a retrieved position is a point where a condition that has not been satisfied changes to
being satisfied. Thus, even if signals match a search pattern at the start of a search, it is not regarded as a
retrieved position.
7
Tap [Execute] .
The instrument puts search marks ( ) at positions where a search condition is satisfied. Up to 1000 positions
can be retrieved. The instrument stops the search if it finds more than 1000 positions.
The retrieved position switching panel appears on the waveform screen.
To stop the search
Press the STOP key.
HIOKI MR6000A966-03