Hioki Memory HiCorder MR6000, Instruction Manual, Page: 86 / 392

80
Configuring Module-Specific Settings
(When you have to choose a current sensor setting) Tap the [Mode] box, and then choose a
connected current sensor.
Available measurement ranges, which depend on chosen current sensors, are as follows:
CT7631/CT7731 200 A
CT7636/CT7736 200 A, 400 A, 1000 V
CT7642/CT7742 2000, 4000
CT7044/CT7045/
CT7046
2000, 4000, 10000
0.1mV/A 2000, 4000, 10000, 20000, 40000, 100000
1mV/A
200, 400, 1000, 2000, 4000, 10000
10mV/A 20, 40, 100, 200, 400, 1000
100mV/A 2, 4, 10, 20, 40, 100
1000mV/A 0.2, 0.4, 1, 2, 4, 10
IMPORTANT
When a current sensor included in Model CT6700 series connects via Model CT9920 Conversion
Cable, set a current sensor model name or its output rate.
2
(When you have changed the measurement mode) Tap [Zero adjust] .
The instrument performs zero-adjustment. Execute zero-adjustment without any input.
3
Tap the [Range (f.s.)] box, and then choose a measurement range from the list.
The instrument automatically configures the scaling setting for a measurement range according to a
recognized current sensor.
IMPORTANT
The figure of each measurement range name represents the maximum current that Model U8977
can measure using the range. However, the instrument cannot measure currents that exceed
the rated current of the connected current sensor. Check the specifications of the current sensor
used.
HIOKI MR6000A966-03