Hioki Memory HiCorder MR6000, Instruction Manual, Page: 59 / 392

53
Overlaying New Waveforms With Previously Acquired Waveforms
2
Tap the button to switch over the display to the waveform screen.
3
3
Overlay the waveforms manually (leaving any waveforms to be displayed on the screen).
Tap the button on the right side of the waveform screen.
Overlay Leaves the acquired waveforms displayed on the screen.
The overlay setting continues to be available until the waveforms are cleared.
Clear Clears all the overlaid waveforms displayed on the screen.
No cleared waveforms can be displayed again.
When the overlay function is enabled (When [Overlay] is set to [Auto] or [Manual] )
• The instrument displays the waveforms always after the data has been acquired.
• The trace cursors show the measured values of the waveforms most recently acquired.
• The following operation is not available on the waveform screen:
Scrolling through waveforms, switching the zoom function between on and off, changing the
magnification, and changing the zero position.
• The instrument leaves the waveforms most recently displayed only and clears the others in the
following cases:
• After selecting > [Sheet] and changing its setting
• After selecting > [Channel] and changing the waveform display settings (switching
between on and off for the display setting or changing a waveform color)
• After executing the search.
Advanced Functions
HIOKI MR6000A966-03