Hioki Memory HiCorder MR6000, Instruction Manual, Page: 37 / 392

31
Reading Measured Values (Trace Cursors, Horizontal Cursors)
4
Tap [Cursor Value] .
You can switch between on and off for the cursor value display every time you tap [Cursor Value] .
5
4
5
Tap [Change page] .
When the instrument displays multiple channels, you can switch the pages to check cursor values of each
channel.
Every time you tap it, the pages are switched.
6
Tap [1: Trace cursor A] or [2: Trace cursor B] .
The waveform screen has two areas where cursor values of trace cursors (trace cursor value 1 and Trace
cursor value 2) appear.
Every time you tap [1: Trace cursor A] , you can toggle the trace cursors displayed on the values of cursor
values 1.
Every time you tap [2: Trace cursor A] , you can toggle the trace cursors displayed on the values of cursor
values 2.
7
6
Cursor values 1 Cursor values 2
Operating the W
aveform Screen and
Analyzing Data
HIOKI MR6000A966-03