Hioki Memory HiCorder MR6000, Instruction Manual, Page: 318 / 392

312
12
Tap the [Auto power on] button to set whether or not to use the automatic startup function.
Off  Does not use the automatic startup function.
On
Uses the automatic startup function.
Supplying power to the instrument can automatically start running Windows
®
, allowing
you to start measurement.
You do not need to use the power key.
13
In the [Shortcut key] area, tap the [S1] and [S2] boxes in turn, and then from the list, choose
an action allocated to each of the S1 and S2 keys.
Off Does not execute any action.
Auto range  Executes the automatic ranging. (Default setting for the S1 key)
Trigger  Executes the forcible trigger. (Default setting for the S2 key)
See entire
waveform
Displays the recording length of waveforms so that they fit the single screen width.
A relatively long recording length may require a lot of time for displaying waveforms.
Reset zoom Displays waveforms at the default display magnification.
Execute Performing calculation using existing data.
Send CAN data Sends data whose the CAN transmission [Timing] setting configured to [Key S1] or
[Key S2] .
When the [Period] setting is configured to [On] , pressing S1 or S2 key can start
regular transmission.
Pressing the same key can stop periodic transmission.
Undo Cancels the previous action, which restores the instrument to the previous setting.
Redo Performs the action canceled by tapping [Undo] .
HIOKI MR6000A966-03