Hioki Memory HiCorder MR6000, Instruction Manual, Page: 76 / 392

70
Configuring Module-Specific Settings
Configuring Model 8970 Freq Unit settings
> [Channel] > [8970]
to
2
12
1
1
Tap the [Mode] box, and then choose a measurement mode from the list.
Freq  Measures frequency of a waveform (in hertz [Hz]).
Rotation speed
Measures the number of rotations of a measuring object (in rotations per minute
[r/min]).
Power frequency Measures power frequency fluctuation (in hertz [Hz]).
Count
Accumulates the number of input pulses.
Duty ratio Measures duty ratios of a waveform to be measured (in percent [%]).
Pulse width Measures pulse widths (in second [s]).
A pulse that rises during the dead time (during a calculation) cannot be measured (with a frequency of 25 kHz
or higher).
Ignored
Calculation (40 μs) Acquisition of the waveform Acquisition of the waveform
2
Tap the area that includes [Input voltage] .
The setting dialog box appears.
3
Tap the [Input voltage] box, and then choose an option for the maximum level of an input
signal from the list.
±10 V  , ±20 V , ±50 V , ±100 V , ±200 V , ±400 V
HIOKI MR6000A966-03