Hioki 3504-40 C HiTester, Instruction Manual

Page: 259 / 292

8.13 Device Document Requirements (Only for Models 3504-50, 3504-60)
253
8
(6) List of the functional elements used for device-specific commands and
explanation of whether to use compound command program headers
The following are used
• Program message
• Program message terminator
• Program message unit
• Program message unit separator
• Command message unit
• Query message unit
• Command program header
• Query program header
• Program data
• Character program data
• Decimal numeric program data
• Compound command program header
(7) Explanation of buffer capacity limits related to block data
Block data is not used
(8) List of program data elements used in <expression> and maximum
nesting level for sub-expressions (including syntax rules assigned for
<expression> by device)
Sub-expressions are not used. The program data elements used are character
program data and decimal numeric program data.
(9) Explanation of response syntax for each query
The response syntax is included in 8.9 "Message Reference" (p. 172).
(10) Explanation of delay in sending messages between devices not fol-
lowing response message element rules
Messages are not sent between devices
(11) Explanation of block data response capacity
There is no block data response.
(12) List of the common commands and queries used
This is included in 8.7 "Message List" (p. 154).
(13) Explanation of the device state after the calibration command ends
without a problem
The
*
CAL? command is not used
(14) Use/non use of the "
*
DDT" command
In the case of a * DDT command being executed, the maximum block length
used to define the trigger macro.
The
* DDT command is not used.