Hioki 3504-40 C HiTester, Instruction Manual

Page: 110 / 292

6.5 Trigger Synchronous Output Function
104
This function enables the measurement signal to be output after measurement is
triggered and ensures that the signal is applied to the sample only during mea-
surement. Thus reducing the generation of heat in the sample and decreasing
electrode wear.
1.
In normal measurement mode, press .
The upper part of the MAIN display area displays the menu contents and the
lower part displays the setting information.
(Refer to "Menu display organization" (p. 13) for menu order)
This setting cannot be changed in comparator mode and BIN mode.
2.
Use or to select the “SYnC” menu item.
3.
Press to enable or disable the Trigger synchronous output
function.
It will toggle “on” and “oFF” each time is pressed.
4.
Press .
The trigger synchronous output function setting is confirmed.
When the trigger synchronous output function is set, the “SYNC SOURCE LED”
lights up.
After confirmation, “OFFSEt” (Offset settings screen) is displayed at the top of
the MAIN display area.
The trigger synchronous output function setting is not confirmed unless
is pressed.
6.5 Trigger Synchronous Output Function
(Trigger synchronous output function setting screen)
Menu content
“on” or “oFF” flashes
(MAIN display area)