Hioki 3504-40 C HiTester, Instruction Manual

Page: 223 / 292

8.9 Message Reference
217
8
Setting and Query of Event Status Enable Register 3 (ESER3)
Syntax Command
Query
Response :ESE3
<Numeric Value>
:ESE3?
<Numeric Value>
<Numeric Value> = 0 to 255 (NR1)
Explanation
Command Sets the mask pattern of the ESER3 to a numeric value from 0 to 255.
A numeric value in NRf format is accepted but non significant digits
are rounded off so the numeric.
The initial value (when the power is turned on) is 0.
Query Returns the ESER3 content as an NR1 numeric value.
Example
Command
Query
Response
:ESE3 64
Sets bit 6 of ESER3.
:ESE3?
:ESE3 64
(when HEADER ON)
64
(when HEADER OFF)
Bit 6 of ESER3 is set to 1.
Note
There is no BIN function for the Model 3504-40.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
DNG OUT
BIN14 BIN13 BIN12 BIN11 BIN10 BIN9
Query of Event Status Register 0
Syntax
Query
Response
:ESR0?
<Numeric Value>
<Numeric Value> = 0 to 255 (NR1)
Explanation
Query Returns the event status register 0 (ESR0) setting content as NR1
numeric data from 0 to 255 and then clears that content.
No header is added to the response message.
Example Query
Response
:ESR0?
4
Bit 2 of ESR0 is 1.
128 64 32 16 8 4 2 1
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
REF COF LER MOF MUF IDX EOM
CEM