Hioki 3504-40 C HiTester, Instruction Manual

Page: 93 / 292

5.2 BIN Measurement Function (Model 3504-50, 3504-60 only)
87
9
5
Setting the Upper Limit and Lower Limit Values to OFF _______________
1.
When entering the upper limit and lower limit values, use to
move left until the far left digit flashes and then press and hold
for at least two seconds or use
to move right until the far right
digit flashes and then press and hold for at least two seconds.
The display changes to “– – – – – –” and OFF is set.
2.
Press to confirm the OFF setting.
3.
Press .
Enter the BIN measurement mode.
Canceling BIN Measurement Mode ________________________________
In BIN measurement mode, press .
The measurement mode LEDs light in the order of BIN  NORM, and then the
unit switches to normal measurement mode.
(Light up)