Hioki 3504-40 C HiTester, Instruction Manual

Page: 128 / 292

6.12 Printing Function
122
If is pressed when an external trigger is set, the measurement values
are output to the printer after measurement finishes.
If is pressed when an internal trigger is set, the measurement values
up until the time when the key is pressed are output to the printer.
1. Example when performing normal measurement
CP 100.034n F |D 0.00041
CP 100.029n F |D 0.00038
2. Example when performing comparator measurement
CP 100.052n F HI|D 0.00050 HI
CP 100.047n F IN|D 0.00045 IN
3. Example when performing BIN measurement (Model 3504-50, 3504-60
only)
CP 100.016n F |D 0.00042 BIN1
CP 100.023n F |D 0.00036 OUTB
Connecting a PC instead of the 9442 Printer enables you to receive the mea-
surement values on the PC.
Set the RS-232C communication conditions on the PC as shown below.
• Bits per second: 19200
• Data bits: 8
• Parity: None
• Stop bits: 1
6.12.3 Printing
Flow control is automatically set to Hardware (RTS/CTS control) if the
interface used with the
3504-40, 3504-50, 3504-60 unit is a printer.