Hioki 3504-40 C HiTester, Instruction Manual

Page: 82 / 292

5.2 BIN Measurement Function (Model 3504-50, 3504-60 only)
76
Setting Judgment Mode_________________________________________
Set the judgment mode before setting the BIN judgment conditions.
(Select the count value setting, the deviation percent (

%) setting.)
The judgment mode is common to comparator measurement and BIN measure-
ment.
1.
In normal measurement mode, press .
The upper part of the MAIN display area displays the menu contents and the
lower part displays the setting information.
(Refer to "Menu display organization" (p. 13) for menu order)
This setting cannot be changed in comparator mode and BIN mode.
2.
Use or to select the “JudGE” menu item.
3.
Use or to select a setting item.
Pressing or causes the display to change in the following manner.
4.
Press .
The judgment mode is confirmed.
After confirmation, “bEEP_J”(Beep setting screen for judgment result) is dis-
played at the top of the MAIN display area.
The judgment mode is not confirmed unless is pressed.
5.
Press .
The unit returns to normal measurement mode.
(Judgment mode setting screen)
Menu content
Judgment mode
(set in step 3)
(MAIN display area)
“Count”
Count setting.
“d-PEr”
Deviation percent (

%) setting.