Hioki 3504-40 C HiTester, Instruction Manual

Page: 12 / 292

6
You should be aware that HIOKI cannot accept any responsibility directly or
indirectly if the unit has been incorporated in some other system, or if it is
resold to a third party.
Use the original packing materials when transporting the unit, if possible.
Before connection and powering on
• Before turning the unit on, make sure the supply voltage matches
that indicated on the its power connector. Connection to an improper
supply voltage may damage the unit and present an electrical hazard.
• The power supply voltage for this unit is switchable. To avoid electri-
cal accidents, check that the voltage selector is set correctly for the
supply voltage you are using.
See
Setting Procedure for the Power Voltage : 2.2 "Checking the Power Voltage"
(p. 18)
• To avoid electrical accidents and to maintain the safety specifications
of this unit, connect the power cord provided only to a 3-contact (two-
con ground) outlet.
See
Connection Procedure : 2.3 "Connecting the Power Cord" (p. 19)
• To avoid shock and short circuits, turn off all power before connect-
ing probes.
Check the connections carefully in order to avoid any chance of setting
up a short-circuit etc.
About the guarantee
Shipping precautions