Fluke 5502A, Operator'S Manual

Page: 231 / 378

Remote Commands
Commands
6
6-39
TC_TYPE_D?
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x
x
(Thermocouple Type Default query) Shows the default thermocouple (TC) sensor type.
Responses:
B
(B-type thermocouple)
C
(C-type thermocouple)
E
(E-type thermocouple)
J
(J-type thermocouple)
K
(K-type thermocouple) (default)
N
(N-type thermocouple)
R
(R-type thermocouple)
S
(S-type thermocouple)
T
(T-type thermocouple)
X
(10
μ
V/
°
C linear output)
Y
(% relative humidity)
Z
(1 mV/
°
C linear output)
Example:
TC_TYPE_D?
shows
K
Shows
K
when the thermocouple type default is a type-K thermocouple.
TEMP_STD
Sequential Overlapped
Coupled
IEEE-488 RS-232
x x x x x
(Temperature Degree Standard command) Selects the temperature standard IPTS -68
(1968 International Provisional Temperature Standard) or its-90 (1990 International
Temperature Standard), which is kept in the Calibrator non-volatile memory. (While
saving configuration data in the non-volatile memory, a period of about 2 seconds, the
Calibrator does not respond to remote commands.) The default is its-90.
Parameters:
IPTS_68
ITS_90
Example:
TEMP_STD ITS_90
See the temperature standard to ITS-90.
TEMP_STD?
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x
x
(Temperature Degree Standard command) Shows the temperature standard IPTS-68
(1968 International Provisional Temperature Standard) or ITS-90 (1990 International
Temperature Standard).
Parameters:
IPTS_68
ITS_90
Example:
TEMP_STD?
shows
ITS_90
Shows
ITS_90
when the temperature degree standard is the 1990 International
Temperature Standard.