Fluke 5502A, Operator'S Manual

Page: 323 / 378

SC300 Oscilloscope Calibration Option
SC300 Oscilloscope Calibration Option Specifications
10
10-5
Edge Function Specifications
Edge Characteristics into 50
Ω
1-Year Absolute Uncertainty, tcal
±
5
°
C
Amplitude
Range (p-p) 4.5 mV to 2.75 V ±
(2 % of output
+
200
μ
V)
Resolution 4 digits
Adjustment Range
±
10 % around each sequence value (shown
below)
Sequence
5 mV, 10 mV, 25 mV, 50 mV, 100 mV, 250 mV,
500 mV, 1 V, 2.5 V
Other Edge Characteristics
Frequency Range 1 kHz to 1 MHz ±
(25 ppm of setting
+
15 mHz)
Rise Time <
400 ps
Leading Edge Aberrations within 10 ns
<(3% of output
+
2 mV)
10 to 30 ns
<(1% of output
+
2 mV)
after 30 ns
<(0.5% of output
+
2 mV)
Typical Duty Cycle 45 % to 55 %
Leveled Sine Wave Function Specifications
Leveled Sine Wave Frequency Range
Characteristics into 50
Ω
50 kHz Reference 50 kHz to 100 MHz
100 to 300 MHz
[1]
Amplitude Characteristics
Range (p-p) 5 mV to 5.5 V
[1]
Resolution
<100 mV: 3 digits
≥
100 mV: 4 digits
Adjustment Range continuously adjustable
1-Year Absolute Uncertainty, tcal
±
5
°
C
±
(2% of output
+
200
μ
V)
±
(3.5% of output
+
300
μ
V)
±
(4% of output
+
300
μ
V)
Flatness (relative to 50 kHz)
not applicable ±
(1.5% of output
+
100
μ
V)
±
(2.0% of output
+
100
μ
V)
Short-term Stability ≤
1%
[2]
Frequency Characteristics
Resolution 10 Hz 10 kHz
[3]
10 kHz
1-Year Absolute Uncertainty, tcal
±
5
°
C
±
(25 ppm
+
15 mHz)
±
25 ppm
[4]
±
25 ppm
Distortion Characteristics
2nd Harmonic
≤
-35 dBc
3rd and Higher Harmonics
≤
-40 dBc
[1] Extended frequency range to 350 MHz is provided, but flatness is not specified. Amplitude is limited to 3 V for frequencies
above 250 MHz.
[2] Within one hour after reference amplitude setting, provided temperature varies no more than
±
5°C.
[3] At frequencies below 120 kHz, the resolution is 10 Hz. For frequencies between 120 kHz and 999.9 kHz, the resolution is
100 Hz.
[4]
±
(25 ppm + 15 mHz) for frequencies of 1 MHz and below.