Fluke 5502A, Operator'S Manual

Page: 230 / 378

5502A
Operators Manual
6-38
TC_TYPE?
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x
x
(Thermocouple Type query) Shows the Thermocouple (TC) temperature sensor type.
When the thermocouple type is changed while you simulate a temperature output, the
temperature is changed to 0
°
C.
Responses:
B
(B-type thermocouple)
C
(C-type thermocouple)
E
(E-type thermocouple)
J
(J-type thermocouple)
K
(K-type thermocouple) (default)
N
(N-type thermocouple)
R
(R-type thermocouple)
S
(S-type thermocouple)
T
(T-type thermocouple)
X
(10
μ
V/
°
C linear output)
Y
(% relative humidity)
Z
(1 mV/
°
C linear output)
Example:
TC_TYPE?
shows
K
Shows
K
when the thermocouple type to simulate a temperature output is a K-type
thermocouple.
TC_TYPE_D
Sequential Overlapped Coupled IEEE-488 RS-232
x x x x x
(Thermocouple Type Default command) Sets the default thermocouple (TC) sensor type,
which is kept in the Calibrator non-volatile memory. (While saving configuration data in
the non-volatile memory, a period of about 2 seconds, the Calibrator does not respond to
remote commands.) The TC type is set to the default at power on and reset.
Responses:
B
(B-type thermocouple)
C
(C-type thermocouple)
E
(E-type thermocouple)
J
(J-type thermocouple)
K
(K-type thermocouple) (default)
N
(N-type thermocouple)
R
(R-type thermocouple)
S
(S-type thermocouple)
T
(T-type thermocouple)
X
(10
μ
V/
°
C linear output)
Y
(% relative humidity)
Z
(1 mV/
°
C linear output)
Example:
TC_TYPE_D J
Set the thermocouple type default to a type-J thermocouple.